The Austin Flush Mount Ceiling Light is the perfect way to add a touch of industrial chic to your home. The sleek, timeless design of The Austin Warehouse Shade is recreated into a close-to-the-ceiling light, making it a perfect addition to any room.
The Ceiling Canopy / Ceiling Rose
We supply our “Stem Canopy” – a 11cm Diameter Die-Casted Ceiling Rose that comes with a threaded nipple It looks like a hollow-threaded piece of pipe, which is usually pre-installed into the Ceiling Rose. The ceiling rose is supplied in Black Ace (EBA) Finish, and is designed to take the full weight of the fixture.
We provide a steel Adaptor Bracket with threaded holes located at the left and right of the adaptor bracket. 8-32 x 3/4″ Pan Philips Screws are supplied (roughly M4 x 20mm long) in the same colour as the canopy, ensuring the entire fixture, and fixings appears the same colour on the ceiling.
Yup, everything is then packaged into a brown or white paper bag and marked with your colour, size, installation instructions, and any applicable warnings.
Flush Mounted Lighting
Please take the shade height and add a further 3cm to accommodate the Adaptor Bracket + Gaskets + Coupler to give you an overall height, or rather ceiling drop from the installation point.
Indoor Rated Canopy
For all of our Flush Mounted Lighting Products, a dry location must be selected for the installation/termination point. This means that water cannot be present in the immediate area at any stage.
Thread-Tape is required for installation (around the nipple) to ensure water-tightness in high humidity locations such as Bathrooms and Toilets
All Barn Light Lighting takes a common “E27 / Edison Screw / ES / Screw Bulb” that you’ll find at your local hardware, or grocery store.
Yup – We use a ceramic Edison Screw (E27) Lampholder.
Whats.. Better? Ceramic?!
Our ceramic/porcelain Lampholders are simply designed to take as much heat as possible (Yes, We build better lighting than our competitors) without effecting the mounting / electrical cabling. Our outdoor pendant lighting is based on decades old, reliable, vintage engineering.
Standard Outdoor Barn Lights – 100W
If you select the “default” arrangement which is simply marked as “Edison Screw Lampholder (No Bulbs Supplied)” with Standard Black Cord – You’ll have the ability to install a 100W Bulb.
Atomic Barn Lighting / Indoor Rated Cables – 60W
If you select an Accessory such as “Atomic Cast Guard” or French Braided Twist – When installed with Glass, you’ll be limited as the sealed glass enclosure becomes a literal heat-trap, resulting is a lesser Wattage rating (60W)
What you *may* want to know if considering purchasing elsewhere
Our competitors will be supplying you with a thermo-plastic lamp-holder which becomes brittle & cracks over time, with a maximum of 60W being typical (also.. not organic / not recyclable). Need to light up an area? Nope – You’ll now need to install spotlights to find your car in Winter.
Smart Bulbs – When you need a kaleidoscope of colour.
Yes, our lighting is fully compatible however we suggest that you try one bulb in the most furthest away location from your wireless signal. We manufacture with Aluminium, and you’ll likely install your new Barn Lights onto Brick or Concrete walls. Neither of these materials are ideal for wireless signals to penetrate through so tread cautiously.
Yup – We hear you, this is sounding too good to be true for a lighting company.
Frankly (the short answer is “Yes”), we could write a page about this – so we did.. -> Are Barn Lights Dimmable?
If you need a “drop” from the ceiling, consider our stem pendant lights or suspended chain ceiling pendants in these conditions as a fixed installation provides less wind related issues for most entrances.
If you’ve got a ceiling that can take some weight, an upgrade to optional Atomic Cast Guards which increase the IP Rating to IP55 and provide an interesting focal point.
For the Kitchen
A typical 1.8m-2.1m (x 900|1200mm) Island bench should have 3x pendants installed equally spaced provide sufficient light during the daytime and evening. For every 400mm of space, the addition of one extra pendant is suggested. The higher you install your pendants, the greater light dispersal, the less pendants are required. Whilst balance makes sense, its not always easy to visualise online!
If you need the ability to raise and drop the height of your dining room table lighting – we recommend our Industrial Chain Hung Pendants
For the Bathroom
“The smaller, the better” – Sparkie dependant, we insist upon using the cast guard & glass to reduce water exposure (think steam) and diffuse light more evenly (Atomic Cast Guard drops the bulb to just before the shade rim in most shade models).
For Walkways, a taller shade with a smaller diameter will provide a smaller focused lighting style. For example the “Cafe Flush Mount Light“. For shorter, and wider diameters like the “Old Dixie Flush Mount” light will provide a wide dispersal
For Garages, an array of flush-mounted lighting will provide more depth to your space than every-day LED downlights. This gives your space some character, and a higher likelihood that you’ll spend more time within your space.
Yes – We have been developing our lighting for years and it is ready to integrate with any sensor on the market today. Your electrician, or related professional will work closely with you to determine which solution best suits your needs, but don’t worry: to put it simply, buying a Barn Light is the easy part of your lighting plan.
The types of sensors available on the market today are microwave (movement), lux meters (during dusk-to dawn periods), and PIR Sensors for night (heat sensor). The best solution for you will depend upon your local conditions, thus supplying a motion sensor isn’t under the purview of the lighting products we provide.
For example: If you live in an area with nocturnal life, you wouldn’t want to install a motion sensor in your backyard covering a large amount of area. For similar reasons, you wouldn’t want a heat sensor covering the sunset as stone holds heat for a long period of time. Some video cameras these days now have a “pre-determined scope” or area of control to focus on, ignoring all else such as a driveway, ignoring the surrounds.
Are you in the market for a Barn Light?We will teach you everything you need to know about our range of Outdoor Lights or “Barn Lights” as we call them as well as the benefits of each type.
Mel & Jesse – We’re real people behind our family-owned small business, making Industrial & Modern Lighting for your home and small business. We manufacture our Lighting, something that gives us great joy to work with fellow Aussies.
What makes it a “Barn Light”? An Australian Made & Owned Lighting Manufacturer dedicated to creating the highest quality outdoor rated lighting that Australia has to offer.
We’re in the business of making your home, and business noteworthy. We work alongside both Designers & Tradies to get the job done, the first time around.