$0.00 AUD

G2 Gooseneck Arm

Available on backorder

[alert type="info"]The G2 Gooseneck Arm SHOWN HERE IS NOT SOLD SEPERATELY and must be purchased as part of any our standard gooseneck fittings.[/alert] The G2 Gooseneck Arm is manufactured by Barn Light Australia here in Hallam, VIC using 25mm x 3mm Wall Thickness Structural Aluminium (6060-T5) sourced from local Australian suppliers. Using our pipe-threader we create a clean thread that will be used to affix our hex-coupler base or atomic cap to hold the lighting fixture and more importantly, keep our electrical wiring safe and secure from the elements.

Pipe bending is completed using in-house staff operating our hydraulic pipe bender designed with three different shoe sizes (formers) that create bends in either 15cm, 20cm or 30cm diameters, some products use more than one shoe and custom goosenecks are possible to create with a little engineering help by our staff.

The G2 Gooseneck Arm is supplied with a 25mm Wall Backing Plate and Fixing Hardware to install onto your mounting surface. We include an aptly named "Adaptor Bracket" that permits you to mount our lighting onto any surface (concrete, timber, brick etc). Screws are coated in the same finish as ordered, so the whole unit will look identical.
Important Product Information.
You might also like...