The perfect feature to light up your front door, the Austin Wall Sconce is our most popular wall-light, and the ideal complement to your Hamptons Style home. The petite Austin Wall Sconce provides a splash of light where needed, and a welcoming glow from a deep bowl that shields the eyes from direct light.
The perfect feature to light up your front door, the Austin Wall Sconce is our most popular wall-light, and the ideal complement to your Hamptons Style home. The petite Austin Wall Sconce provides a splash of light where needed, and a welcoming glow from a deep bowl that shields the eyes from direct light. The Austin is a durable, long lasting, completely outdoor rated light that highlights your home’s best features.
|Height||Width||Projection (Overall)||(Wall) Sconce Plate Diameter|
The Austin’s small, 25mm diameter shade allows for mounting in tighter spaces while the minimally intrusive gooseneck keeps walls and doorways lit without intruding too far into the space. Proudly Australian made, this hand-spun, all-weather aluminium shade is affixed to a slender 1/2″ Brass-Plated Steel Arm and mounted on a 160mm spun aluminium sconce plate. If you like the Austin Wall Sconce you may also like the Eclipse Wall Sconce – same sconce different shade, or take a look at the Avalon – same shade with a more classic base.
Read More about the Austin Wall Sconce on our blog: https://www.barnlight.com.au/client-focus/federation-home-lighting-heritage-colour-schemes/
The Backing Plate.
Our Hand Finished Aluminium Wall Sconce Plate [SCO-WBP2 / SCO-WBP3] is 160mm in diameter and projects 48mm off the wall.
The Sconce / Gooseneck / Support Arms.
Our Sconce Arms are manufactured from Brass-plated, clear coated, rolled steel. We prepare the surfaces and then powdercoat a top-coat of your selected colour. Whilst we use aluminium for every other facet of our manufacturing process, the structural integrity of steel is required for these wall light models.
Wall Fixing Bracket
We provide a steel “Cross Bar” with M10x1.0mm threaded in the centre. This fixing permits customers with different mounting surfaces (and angles, like weatherboards) to “reblock” the backing without needing to modify the product to suit. The ability to install the crossbar over two surfaces makes these installation advantageous for non-recessed electrical terminations.
To affix this bracket to your structure using any of your typical fixings (think Timber Screws/Concrete/Masonry Fixings), then affix your Sconce Backing Plate using our supplied 75mm Threaded Nipple A supplied, colour-matched decorative Brass Locknut finishes your new design
We supply an Australian Made, closed cell (waterproofing) gasket designed to fit between your Wall Sconce Plate & Mounting Surface. The gasket is 5mm thick, 165mm in diameter (5mm larger than the sconce plate) to assist in positioning with a 30mm centre hole for electrical to be terminated within the sconce plate.
Yup, everything is then packaged into a brown or white paper bag and marked with your colour, size, installation instructions, and any applicable warnings
All Barn Light Lighting takes a common “E27 / Edison Screw / ES / Screw Bulb” that you’ll find at your local hardware, or grocery store. If you’d prefer to purchase our LED Bulbs, the supplier (VintageLED.com.au) provides a three-year warranty.
Yup – We use a ceramic Edison Screw (E27) Lampholder.
Whats.. Better? Ceramic?!
Our ceramic/porcelain Lampholders are simply designed to take as much heat as possible (Yes, We build better lighting than our competitors) without effecting the mounting / electrical cabling. Our outdoor wall lighting is based on decades old, reliable, vintage engineering.
Standard Outdoor Barn Lights – 100W
If you select the “default” arrangement which is simply marked as “Edison Screw Lampholder (No Bulbs Supplied)” – You’ll have the ability to install a 100W Bulb.
Atomic Barn Lighting – 60W
If you select an Accessory such as “Atomic Cast Guard” – When installed with Glass, you’ll be limited to 60W as the sealed glass enclosure becomes a literal heat-trap. You can opt to NOT install the glass at your discretion however Atomic “Fully Integrated LEDs” required the installation of glass at all times.
What you *may* want to know if considering purchasing elsewhere
Our competitors will be supplying you with a thermo-plastic lamp-holder which becomes brittle & cracks over time, with a maximum of 60W being typical (also.. not organic / not recyclable). Need to light up an area? Nope – You’ll now need to install spotlights to find your car in Winter.
Smart Bulbs – When you need a kaleidoscope of colour.
Yes, our lighting is fully compatible however we suggest that you try one bulb in the most furthest away location from your wireless signal. We manufacture with Aluminium, and you’ll likely install your new Barn Lights onto Brick or Concrete walls. Neither of these materials are ideal for wireless signals to penetrate through so tread cautiously.
Yup – We hear you, this is sounding too good to be true for a lighting company.
Frankly (the short answer is “Yes”), we could write a page about this – so we did.. -> Are Barn Lights Dimmable?
Yes – We have been developing our lighting for years and it is ready to integrate with any sensor on the market today. Your electrician, or related professional will work closely with you to determine which solution best suits your needs, but don’t worry: to put it simply, buying a Barn Light is the easy part of your lighting plan.
The types of sensors available on the market today are microwave (movement), lux meters (during dusk-to dawn periods), and PIR Sensors for night (heat sensor). The best solution for you will depend upon your local conditions, thus supplying a motion sensor isn’t under the purview of the lighting products we provide.
For example: If you live in an area with nocturnal life, you wouldn’t want to install a motion sensor in your backyard covering a large amount of area. For similar reasons, you wouldn’t want a heat sensor covering the sunset as stone holds heat for a long period of time. Some video cameras these days now have a “pre-determined scope” or area of control to focus on, ignoring all else such as a driveway, ignoring the surrounds.
Older homes typically have newer exterior decking which drops the installation point from 1.8m to any deviation, causing issues obtaining replacement lighting, further “Coach Lamps” and similar styles (wall sconces typically push light up!) are usually installed lower than desired once lighting styles are changed.
We recommend measuring the area to ensure you’ve got enough space for the (over-) arching steel arms AND enough room for a drop from the mounting point.
If you’ve got the space for both, our Industrial Wall Sconces like The Original, Astro, Old Dixie Wall Lights. A unique benefit for these units is the addition of optional Atomic Cast Guards which increase the IP Rating to IP55.
Are you in the market for a Barn Light?We will teach you everything you need to know about our range of Outdoor Lights or “Barn Lights” as we call them as well as the benefits of each type.
Mel & Jesse – We’re real people behind our family-owned small business, making Industrial & Modern Lighting for your home and small business. We manufacture our Lighting, something that gives us great joy to work with fellow Aussies.
What makes it a “Barn Light”? An Australian Made & Owned Lighting Manufacturer dedicated to creating the highest quality outdoor rated lighting that Australia has to offer.
We’re in the business of making your home, and business noteworthy. We work alongside both Designers & Tradies to get the job done, the first time around.