Wesco Gooseneck Barn Light

Can't decide on what type of finish you want your black Barn Light in?
We've got you covered - use the table or the button below for more info.

The BEST finish: WS100-Black Matt
The BETTER finish: Electro Black Ace
The GOOD finish: PC100-Black Matt

View More Info

We don't use steel in any of our standard lighting fixtures, so we've created a faux finish; WS975-Galvanised a premium, hand-painted finish made from automotive fine metallic paints and Acrylic Etch Primers designed to age with the building and surrounds. Because we don't use steel, our fixtures will never rust so the worst result you'll ever see is a bright silver finish once the paint strips (we've been in business since 2012 and we're yet to receive a complaint)

You'll be probably asking yourself, "Why so expensive?"

1) Its hand-dabbed/finished.
2) The paint is expensive ($400 for 4ltrs for the silver, $200 for the etch base mixed).
3) Each fixture/batch requires the same pattern/colour mix, thus
4) We can't keep stock as all parts needs to be batched

View More Info

Our 'standard' gooseneck is designed to fit closer to the wall providing both wall and floor illumination. All Goosenecks are packaged with a 12cm wall backing plate in the chosen finish. Projection: 47cm x Height: 23cm

Our SG16 sconce gooseneck is designed to fit closer to the wall than our G15 gooseneck. Provides a smaller projection with wall illumination.
Projection: 40cm x Height: 21cm

Our most commonly requested 'garage' gooseneck is designed to fit further away from the mounting wall to illuminate a larger area below and around the installation area. All Goosenecks are packaged with a 12cm wall backing plate in the chosen finish. Projection: 57cm x Height: 23cm.

Our G19 Gooseneck Light is been used in primarily outdoor locations where structural and design integrity is paramount. Used by The Coffee Club among others, The G19 is simple, yet elegant, strong, but petite in appearance. Wall Bracket supplied in the chosen finish.
Projection: 40cm x Height: 45cm x Width: 15cm

Our G36 Straight Arm has been designed to weather the strongest elements that Australia's seasons have to offer. Provided with two mounting points the G36 can be otherwise inverted (supported from top or bottom) to provide the safest and most economical lighting features. The G36 is strong and flexible for all manners of installation. Wall Bracket supplied in the chosen finish.
Projection & Height: Variable

Our 'straight' gooseneck is designed to fit closer to the wall providing both wall and floor illumination. All Goosenecks are packaged with a 12cm wall backing plate in the chosen finish.
Projection: 35cm

Our Standard Cast Guard is made from die-cast aluminium, threaded at the base, for affixing to the bottom of our shades & Atomic family of products. Designed to withstand any decent amount of shock to protect the glass and globe within. 90% of customers choose this guard.

Our Thick or 'Heavy Duty' Cast guard is designed to be both idiot and vandal proof. Made using the same die as our Standard, this bulkier cousin is ideal for pubs, clubs, restaurants, and any place you might find flying beer bottles. Ultimately the strongest of our cast guard, it also permits the least amount of light out.

If the ship has sailed, and you want to remember the experience - our Nautical Wire Guard is just for you. Made from steel wire, this guard is designed to allow the most light output while providing some protection. Best used where beach balls and tennis balls are frequently used.

Our simple Clear Glass is designed for the maximum amount of light output you can possibly obtain from any globe. Made from thick glass, light dispersal is rated to a minimum. If you'd like to have an additional styling benefit consider using a vintage styled LED bulb or the typical incandescent bulbs for ambient lighting.

Our frosted glass is manufactured right here at Barn Light. Using our handy sandblaster, the inside of the glass is blasted with a fine garnet media to produce a halo effect around the shade. Best used if a higher wattage bulb is required and you need to hide the hideous thing.

The "prettiest" and most expensive. Hand-blown by master glassblowers in New Jersey, USA, these prismatic or simply 'ribbed' pieces of glass are designed for both ambiance and lighting brilliance. Enjoy the shadows dancing upon your wall while dining and entertaining.

Our Standard Ceramic E27 (Edison 27mm) Lampholder that suits "screw in bulbs". You can find your preferred 27mm ES bulbs at your local hardware store. Maximum Wattage is 200W Incandescent. Lamps for all lights except for those with glass (100W).

We call this 'dumb wired' since there is nothing between the lampholder and the supply wires. Input Voltage is [email protected]

*** No warranty applies for LED units installed without Glass! ***

Our "designed for purpose" Atomic LED lighting uses a integrated LED fitting courtesy of the Research & Design Efforts of Barn Light USA & CREE Lighting USA. We have engineered a 42V Dimmable Driver, custom engineered Heatsink, coupled with a high performance CXA2520 LED Module to provide an unparalleled lighting solution to a variety of environments. Lumen Output is 1600lm.

All fittings are provided with a purposely designed atomic enclosure for wall mounting, flexible, and fixed stem installations. The installation method to install these units is the same as our standard atomic fittings.
Input Voltage is [email protected] to the driver, Output Voltage is 42V. LED draw varies, please refer to our Fully Integrated LED Modules page for further information.

2700K refers to the colour spectrum of light that we commonly associate with candle light, home, sunset, and the soft dancing of flames of the fireplace. Most Australians will have grown up under the warmth and homely atmosphere we can associate with incandescent lighting.

For the Consumer: This is the light that you are probably most familiar with seeing around the home. The warm glow is reminiscent of the sunset or a flame. Common applications area: Bedrooms & Living Rooms

Our "designed for purpose" LED lighting uses a integrated LED fitting courtesy of the Research & Design Efforts of Barn Light USA & CREE Lighting USA. We have engineered a 48V Dimmable Driver, Heatsink, and LMH020 LED Module to provide an unparalleled lighting solution to a variety of environments. Choose from a range of 850Lumen through to 4000Lumen modules and four colour temperatures each.

All fittings are provided with a purposely designed enclosure for wall mounting, flexible, and fixed stem installations. The installation method to install these units is the same as our standard fittings.

Input Voltage is [email protected] to the driver, Dedicated dimming wires, Output Voltage is 48V. LED draw varies, please refer to our Fully Integrated LED Modules page for further information.

850 Lumens ~ is comparable to any of the following;

• 60W Incandescent
• 21W CFL (Compact Fluorescent)
• 75W PAR (Parabolic Aluminized Reflector)
• 6~9W LED (Light Emitting Diodes)

1250 Lumens ~ is comparable to any of the following;

• 75W Incandescent
• 26W CFL (Compact Fluorescent) 
• 100W PAR (Parabolic Aluminized Reflector)
• 10-15W LED (Light Emitting Diodes)

2000 Lumens   ~ is comparable to any of the following;

• 125W Incandescent
• 32W CFL (Compact Fluorescent) 
• 50W HID (High-Intensity Discharge)
• 15-20W LED (Light Emitting Diodes)

3000 Lumens   ~ is comparable to any of the following;

• 200W Incandescent 
• 42W CFL (Compact Fluorescent)
• 70W HID (High-Intensity Discharge)
• 30-40W LED (Light Emitting Diodes)

4000 Lumens ~ is comparable to any of the following;

• 250W Incandescent
• 50W CFL (Compact Fluorescent)  
• 100W HID (High-Intensity Discharge)
• 40-48W LED (Light Emitting Diodes)

Looks like you are trying to achieve something.. big.. huge.. complex.. and we can help :D
Send us an email or give us a call and we'll be able to assist you and your project from there.

2700K refers to the colour spectrum of light that we commonly associate with candle light, home, sunset, and the soft dancing of flames of the fireplace. Most Australians will have grown up under the warmth and homely atmosphere we can associate with incandescent lighting. The standard cheap A60 bulb is what we call the standard "pear" bulb that shaped our childhoods. 

For the Consumer: This is the light that you are probably most familiar with seeing around the home. The warm glow is reminiscent of the sunset or a flame. Common applications area: Bedrooms & Living Rooms

3000K - For the environments that entail completing tasks with a degree of clarity. Given the small bump up from 2700K Incandescent light, 3000K is still within the same realm of relaxation and ambience lighting.

For the Consumer: A bathroom is still a place in your home where you require want warm light levels, but slightly higher so that you can see where that errant whisker or eyebrow that needs removal (maybe both!) and see a brighter, more youthful reflection in the mirror. You won't miss lipstick smeared teeth or collars!

For the Designer: Kitchens are usually a social place that becomes a room to elicit your culinary talents. 3000K will assist in presenting an accurate CRI (Colour Rendering Index; the way we see colour) that shows colour accurately. This will ensure that the Chicken is cooked all the way through (by way of pink being highly visible) or if the Egg white needs a few more seconds. This will let you see the true colour of the food presented to you.

3500K - Circadian lighting theory will tell you that the brain is most alert in the middle of the day when light levels move into the pure white areas of the spectrum. We use this colour temperature to our advantage (to the detriment of our sleeping patterns) where people need to focus and remain alert. Neutral tones (small yellow mix) tends to reduce the stress of a common work day.

For the Consumer: Keeping your home office or the laundry in this colour temperature will ensure that the tasks will always be at the forefront of your mind* (conditions apply). 3500K will keep employees alert yet relaxed, all without a coffee maker!

For the Designer: Retail stores need to create an inviting environment on the warm side of the scale, this allows your customers to see the true qualities of your products such as clothing.

4000K - When you require precision, clarity, and a clean environment. When you need precision and the ability to see your subject clearly, cool white lighting is ideal. These color temperatures are going to be 4000K or higher for specialist applications.

For the Consumer / Mechanic: If you are using your garage as a work space, and are tired of trying to find that 13mm socket that's fell in the entire for n'th time today, you will want to use clean crisp lighting. This will bring clarity to any project you are working on and create the safest working environment.

For the Designer: Compared to a clothing retail (3500K) store, supermarkets typically opt for a slightly higher color temperature. This creates a better environment for examining foods and also makes the colours pop to make marketing packaging more appealing.

Note for the Designers: We do NOT recommend colour temperatures over 3500K for retail environments as a these light sources are more commonly "too blue" and can make customers look unhealthy. This leads them to leave the store without making a purchase.. and looking for sunglasses. 4000K~5000K has specialist lighting applications, namely medical, warehousing, and sports stadiums. If you require a lighting specification to suit, contact us!